diff --git a/README.md b/README.md
index acd2e10..3054f13 100644
--- a/README.md
+++ b/README.md
@@ -6,7 +6,7 @@ Linux Fax Stack using Hylafax and t38modem.
This guide was created using information from the opalvoid wiki (http://wiki.opalvoip.org/index.php?n=Main.HomePage)
-## Softwarestack
+## Software stack
### ptlib
(legacy) library for doing a little bit of everything.
@@ -15,9 +15,9 @@ This guide was created using information from the opalvoid wiki (http://wiki.opa
Voice codec used by e.g. mumble.
### t38modem
-Emulates a serial modem from SIP connetion
+Emulates a serial modem from SIP connection
-### Hylafax
+### HylaFax
Enterprise grade software, managing physical and emulated modems.
Has some problems: https://github.com/lexbailey/compilerfax/blob/main/hylafax_is_broken
@@ -56,7 +56,7 @@ make install
```
#### t38modem
-If you are getting error about `-1` not being able to be casted to a `long unsigned int` due to `-Wnarrowing` inside `dle.cxx`, you can add `-Wno-narrowing` after the `CPPFLAGS` in the Makefile to disable this error
+If you are getting error about `-1` not being able to be cast to a `long unsigned int` due to `-Wnarrowing` inside `dle.cxx`, you can add `-Wno-narrowing` after the `CPPFLAGS` in the Makefile to disable this error
```bash
git clone https://github.com/hehol/t38modem
@@ -300,16 +300,14 @@ sudo systemctl start t38modem.service
## Install HylaFax
-
-- Version 6
+These instructions were tested using Hylafax version 6
- `sudo apt install hylafax-server`
-
- Set Postfix Configuration to **Local only** in dpkg-reconfigure menu
+## Configure HylaFax
- Run `sudo faxsetup`
-
- Add new modem
- Enter correct modem port (`ttyT38-1`)
- - Enter dialing configuration
+ - Enter dialing configuration (see Dial Rules for Eventphone EPVPN)
- Accept default configuration for everything else
- It should automatically detect it to be a `T38FAX` modem
- Look at `man sendfax` to send faxes
@@ -320,7 +318,7 @@ sudo systemctl start t38modem.service
Fax over SIP is not stable at all in my experience
-## Cron
+### Cron
- Alias your fax admin account as `FaxMaster` (`/etc/aliases`)
@@ -338,18 +336,20 @@ FaxMaster: $USER # replace with fax admin account
25 23 * * * sh /usr/sbin/faxcron | mail FaxMaster
```
-## FaxDispatch
-
-- https://legacy.hylafax.org/content/Advanced_Permissions_with_6.0
-
-## Dial Rules for Eventphone
-
+### Dial Rules for Eventphone EPVPN
+If you want to use Eventhone EPVPN, you can apply the following dial settings onto your modems.
+You can find the config at `/etc/hylafax/config.ttyT38-1`.
+In this case `ttyT38-1` is the modem block device.
```
CountryCode: 1
AreaCode: 999
```
-## TODO
+## FaxDispatch
+
+- https://legacy.hylafax.org/content/Advanced_Permissions_with_6.0
+
+# TODO
- **TODO: Test on Debian / RockPi / RaspberryPi**
- **TODO: Test on Eventphone Infra**
- **TODO: Package t38modem with service files and config**